Today, I took an other video on my Honda CBR125R, and tried to do some data overlay using RaceRender 3.5.5 Free. The data has been acquired using Fuelino Proto3, the open source fuel injection module and data logger for motorcycle. The signals visualized in the video below are: Engine speed (rpm) Throttle Position Sensor signal … Continue reading "Fuelino Proto3 and Race Render 3 video overlay"
In this article, I would like to show the analysis which I have done on the ECU installed on Honda CBR125R. One person from France kindly sent me for free this ECU, and I sent him a Fuelino Proto3. Before opening the ECU, it looks as in the following picture. First of all, the following … Continue reading "Keihin ECU on Honda CBR125R"
In this article, I will explain how to connect a Fuelino Proto3 to your motorcycle. Fuelino is a fuel injection controller and data logger designed for motorcycles equipped with EFI (Electronic Fuel Injection). By regulating the fuel injected in the cylinder, you can increase the power of your engine. Even if this modification is optional, … Continue reading "Fuelino Proto3 wiring diagram"
I waited for this moment for a long time. After designing, manufacturing, soldering and mounting the Fuelino Proto3 board, today I finally tested on my motorcycle (Honda CBR125R). At first, let me introduce this board very quickly. Fuelino project was born just 3 months ago. I was trying to design a piggyback ECU, which can … Continue reading "Fuelino Proto3 first test on motorcycle Honda CBR125R"
To perform some tests, I interfaced the following modules to a Fuelino Proto2 board: Catalex MicroSD module, for data logging on micro SD card. Interfaced using SPI communication protocol (6-pin connector). LCD module (AE-AQM0802), for real time data visualization. Interfaced using I2C (TWI) protocol (4-pin connector). The picture below shows how the LCD display module looks … Continue reading "Data logging and LCD display visualization with Fuelino"