This article is for everyone who want to install a Booster Plug on their motorcycles, but don't have that 200 dollars to spend for it. You are definitely in the right place, because I created a guide which explains how to make your own Booster Plug at home, just by buying some components on Amazon … Continue reading "Make your own Booster Plug for your Ducati"
Tag: DIY
Data logging and LCD display visualization with Fuelino
To perform some tests, I interfaced the following modules to a Fuelino Proto2 board: Catalex MicroSD module, for data logging on micro SD card. Interfaced using SPI communication protocol (6-pin connector). LCD module (AE-AQM0802), for real time data visualization. Interfaced using I2C (TWI) protocol (4-pin connector). The picture below shows how the LCD display module looks … Continue reading "Data logging and LCD display visualization with Fuelino"
Custom ECU for Fuel Injection regulation: schematics and layout
Today I would like to share with you the schematics of the DIY ECU which I built for my Honda CBR125R. This additional ECU does not have the purpose of substituting completely the original Honda (Keihin) one; it is an ECU which works, in series with the original one, to manage the signal of the … Continue reading "Custom ECU for Fuel Injection regulation: schematics and layout"
Akrapovic carbon racing exhaust sound check
Yesterday I took some videos to show how the sound will change after mounting an Akrapovic carbon racing exhaust on your Honda CBR125R motorcycle. First of all, let me list up the mods that I did on my bike: Akrapovic carbon racing exhaust system Modified air filters (Daytona 45mm + Kijima 12mm) Athena bore-up kit … Continue reading "Akrapovic carbon racing exhaust sound check"