This guide simply explains how to flash an "ino" sketch on your Arduino Uno/Nano or similar, using Arduino IDE. For this guide, I used a chinese Arduino Nano clone equipped with CH340 USB-to-UART adapter. This guide is also applicable for flashing Fuelino software into Fuelino hardware (such as Fuelino Proto3). Before performing the following steps, … Continue reading "Arduino Nano sketch flashing with Arduino IDE"
Tag: Uno
Flashing Arduino with avrdude using Raspberry Pi shell
Recently, I found a method to flash a "hex" file into Arduino Nano, by using "avrdude" running on a Raspberry Pi. In my case, I have an Arduino Nano connected, via USB, to a Raspberry Pi 3 B. The Raspberry Pi is connected to my home network using an Ethernet cable. I am developing the … Continue reading "Flashing Arduino with avrdude using Raspberry Pi shell"